Foam Filled Fender
Keman Foam Filled Fender is the best in the market.
Keman® Foam Filled Fender uses high elasticity materials. Foam Filled Fender is a better alternative option to using solid rubber dock fender or even a floating pneumatic fender.
Foam filled fender is low maintenance, unsinkable, high performance, and easy installation. It can be ordered in custom color according to your company needs.
Foam Filled Fender has smooth surface and high flexibility allowing it to adjust its shape against the berthing vessel. It eliminates impact from the sharp edges of traditional solid fender to the vessel body. It has a unique ability to conform hull contours and theirs attached accessories. It eliminates point of loading area making all contact surface to give greater energy absorption.
Keman® Foam Filled Fender is filled with Polyethylene Foam (PE Foam), reinforced with nylon cord layers, and covered with polyurea (PU foam) coating. We use steel pipe in the center and flanges with mooring eyes at both ends.
Foam Filled Fender can be installed hanging at the side of docks or floating on the water.
Keman Foam Fenders diameter is available from 600 mm to 2,100 mm and length from 1,200 mm to 5,500 mm. Foam Filled Fenders has really low Reaction Force compared to solid rubber fender and even pneumatic fender (Yokohama Fender).
Please do not hesitate in contacting us for your custom needs. Our in house design and engineer team will design, calculate, and simulate your needs.
Keman Foam Filled Fender
Keman Foam Filled Fenders are:
- Low maintenance
- Available in custom color
- High performance
- Easy installation
Other Marine Fender Products:
Keman Dock Side Fenders are manufactured according to our software and simulation. Keman rubber compound produces the most suitable tensile strength and elongation for fenders.
Keman Pneumatic Fender is ISO 17357-1:2014 certified by DNV-GL and has TKDN certification for local content. Keman Pneumatic Fenders are the most cost effective in Indonesia.
PT Kemenangan sells PVC inflatable fenders made in Denmark. Many people in Indonesia call this as Polyform. Dan-Fender inflatable fenders are the most cost efficient.
Please do not hesitate asking us should you have any question or concern.
What are the types of Foam Filled Fender available?
PT Kemenangan produces:
- Chain-through type
- Center-pipe (swivel eyes) type
Please let us know your current project requirements and our in-house designers will guide you and give you the most suitable solutions.
What are the options for the outer skin of the Foam Fender?
Keman Foam Fender may have Polyurethane or Polyurea elastomer skin.
Polyurea coating may have some loss of gloss, some chalking and discoloration due to ultraviolet (UV) exposure. However, this does not affect the quality and performance. The use of UV stabilizers and antioxidants will not prevent coating discoloration and fading over time when used in light colors for exterior exposure.
Polyurethane, on the other hand, having the addition of pigments will improve the resistance to UV exposure. Polyurethanes are resistant to UV attack and are used in exterior coating formulations. The aliphatic polyurethanes are extremely tough with better resistance than the aromatic types. Aliphatic polyurethane will prevent chalking, cracking or any other UV degradation better than the aromatic types.